Quick Reference Guide

304 Radius Commands
radius-server source-ip
The radius-server source-ip Global Configuration mode command specifies the source IP address used
for communication with RADIUS servers. Use the no form of this command to return to the default.
Syntax
• radius-server source-ip source
• no radius source-server-ip source
• source — Specifies the source IP address.
Default Configuration
The default IP address is the outgoing IP interface.
Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example configures the source IP address used for communication with RADIUS servers
to 10.1.1.1.
radius-server source-ipv6
The radius-server source-ipv6 Global Configuration mode command specifies the source IPv6 address
used for the IPv6 communication with RADIUS servers. Use the no form of this command to return to
the default.
Syntax
• radius-server source-ipv6 source
• no radius-server source-ipv6 source
• source — Specifies the source IPv6 address.
Default Configuration
The default IP address is the outgoing IP interface.
Command Mode
Global Configuration mode.
Console (config)# radius-server source-ip 10.1.1.1
5400_CLI.book Page 304 Wednesday, December 17, 2008 4:33 PM