Quick Reference Guide

106 Address Table Commands
show bridge address-table
The show bridge address-table Privileged EXEC mode command displays all entries in the bridge-
forwarding database.
Syntax
• show bridge address-table [ vlan vlan ] [ ethernet interface | port-channel port-channel-number ]
• vlan — Specific valid VLAN, such as VLAN 1.
• interface — A valid Ethernet port .
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
• Internal usage VLANs (VLANs that are automatically allocated on routed ports) would be presented in
the VLAN column by a port number and not by a VLAN ID.
Example
In this example, all classes of entries in the bridge-forwarding database are displayed.
Console# show bridge address-table
Aging time is 300 sec
vlan mac address port type
---- ----------- ---- ----
1 00:60:70:4C:73:FF g8 dynamic
1 00:60:70:8C:73:FF g7 dynamic
200 00:10:0D:48:37:FF g4 static
8 00:10:0D:48:37:FF g2 dynamic
5400_CLI.book Page 106 Wednesday, December 17, 2008 4:33 PM