Specifications


Example

Console(config)#mac-address-table static 00-e0-29-94-34-de ethernet 1/1 vlan 1 delete-on-reset

Console(config)#
Dynamic Addresses
The Dynamic Address lookup table allows you to view the MAC addresses that are currently in the address database. When addresses are in the database,
the packets intended for those addresses are forwarded directly to those ports. You can sort the table by interface, VLAN, and MAC address by selecting the
sort key from the drop-down menu.
The Dynamic Addresses page contains the following options for querying the dynamic MAC address table:
l Interface — Check the option box and select a port or trunk from the drop-down menus.
l MAC Address — Check the option box and type the address in the box provided.
l VLAN — Check the option box and select the appropriate VLAN from the drop-down menu.
l Address Table Sort Key — Select the key from the drop-down menu to sort the displayed table entries.
l Query button — Click this button to execute the query once you have selected the criteria for the query.

Command
Usage
mac-address-table static mac-address {interface interface} vlan vlan-id [action]
Maps a static address to a port in a VLAN
The action parameters are:
delete-on-reset: Assignment lasts until switch is reset
permanent: Assignment is permanent
show mac-address-table [address mac_address [mask]] [interface interface] [vlan vlan-id] [sort
{address | vlan | interface}]
Allows you to view classes of entries in the bridge-
forwarding database