Quick Reference Guide

80 Command Modes

www.dell.com | support.dell.com

DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY

LC (Line Configuration) Mode

MA (Management Access-level) Mode

switchport general ingress-

filtering disable

Disables port ingress filtering.

switchport general map

protocols-group vlan

Sets a protocol-based classification rule.

switchport general pvid Configures the PVID when the interface is in general mode.

switchport mode Configures the VLAN membership mode of a port

switchport protected Overrides the FDB (Forwarding Database) decision, and sends all the

Unicast, Multicast and Broadcast traffic to an uplink port.

switchport trunk allowed vlan Adds or removes VLANs from a port in general mode.

switchport trunk native vlan Defines the port as a member of the specified VLAN, and the VLAN ID

is the "port default VLAN ID (PVID)".

traffic-shape Sets the shaper on an egress port.

Command Group Description

autobaud Configures the line for automatic baud rate detection (autobaud)

enable authentication Specifies the authentication method list when accessing a higher

privilege level from a remote telnet or console.

exec-timeout Configures the interval that the system waits until user input is detected.

history Enables the command history function.

history size Configures the command history buffer size for a particular line.

console.

password Specifies a password on a line.

password-aging Sets the expiration time of line passwords in the local database.

speed Configures the baud rate of the line.

Command Group Description

deny (Management) Defines a deny rule.

permit (Management) Defines a permit rule.