Quick Reference Guide

76 Command Modes
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
spanning-tree max-age Configures the Spanning Tree bridge maximum age.
spanning-tree mode Configures the Spanning Tree protocol.
spanning-tree mst
configuration
Enables configuring an MST region by entering the Multiple Spanning
Tree (MST) mode.
spanning-tree mst max-hops Configures the number of hops in an MST region before the BDPU is
discarded and the port information is aged out.
spanning-tree mst priority Configures the device priority for the specified spanning-tree instance.
spanning-tree pathcost method Sets the default pathcost method.
spanning-tree priority Configures the Spanning Tree priority.
stack master Forces selection of a stack master.
tacacs-server host Specifies a TACACS+ host.
tacacs-server key Sets the authentication encryption key used for all TACACS+
communications between the device and the TACACS+ daemon.
tacacs-server source-ip Specifies the source IP address that will be used for the communication
with TACACS+ servers.
tacacs-server timeout Sets the timeout value.
username Establishes a username-based authentication system.
vlan database Enters the VLAN database configuration mode.
wrr-queue cos-map Maps CoS values to a specific egress queue.