Quick Reference Guide

64 Command Groups
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Tunnel Commands
User Interface Commands
Command Group Description Access Mode
interface tunnel enters tunnel interface configuration mode. Global Configura-
tion
tunnel mode ipv6ip configures an IPv6 transition mechanism global sup-
port mode.
Interface Tunnel
Configuration
tunnel isatap router configures a global string that represents a specific
automatic tunnel router domain name.
Interface Tunnel
Configuration
tunnel source sets the local (source) tunnel interface IPv4 address. Interface Tunnel
Configuration
tunnel isatap query-inter-
val
configures the interval between DNS Queries (before
the IP address of the ISATAP router is known) for the
automatic tunnel router domain name.
Global Configura-
tion
tunnel isatap solicitation-
interval
configures the interval between ISATAP router solici-
tations messages (when there is no active ISATAP
router).
Global Configura-
tion
tunnel isatap robustness configures the number of DNS Query/Router Solicita-
tion refresh messages that the device sends.
Global Configura-
tion
show ipv6 tunnel displays information on the ISATAP tunnel. Privileged EXEC
Command Group Description Access Mode
enable Enters the privileged EXEC mode. User EXEC
disable Returns to User EXEC mode. Privileged EXEC
login Changes a login username. Priv/User EXEC
configure Enables the global configuration mode. Privileged EXEC
exit (Configuration) Exits any configuration mode to the next highest mode
in the CLI mode hierarchy.
All
exit Closes an active terminal session by logging off the
device.
Priv/User EXEC
end Ends the current configuration session and returns to
the Privileged EXEC mode.
After Privileged
EXEC
help Displays a brief description of the help system. All
terminal datadump Enables dumping all output of a show command without
prompting.
User EXEC