Quick Reference Guide

Command Groups 57
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
SNMP Commands
Command Group Description Access Mode
snmp-server
community
Sets up the community access string to permit access
to SNMP protocol.
Global Configuration
snmp-server view Creates and modifies view entries. Global Configuration
snmp-server group Configures a new SNMP group or a table that maps
SNMP users to SNMP views.
Global Configuration
snmp-server user Configures a new SNMP v3 user. Global Configuration
snmp-server engineID
local
Specifies an SNMP EngineID on the local device. Global Configuration
snmp-server enable
traps
Enables the device to send SNMP traps or SNMP
notifications.
Global Configuration
snmp-server filter Creates and modifies filter entries. Global Configuration
snmp-server host Specifies an SNMP notification recipient. Global Configuration
snmp-server v3-host Specifies an SNMP v3 notification recipient. Global Configuration
snmp-server trap
authentication
Enables the device to send Simple Network
Management Protocol traps when authentication
failed.
Global Configuration
snmp-server contact Sets up a system contact. Global Configuration
snmp-server location Sets up the information on where the device is
located.
Global Configuration
snmp-server set Sets SNMP MIB value by the CLI. Global Configuration
show snmp Displays the SNMP status. Privileged EXEC
show snmp engineid Displays the local SNMP EngineID. Privileged EXEC
show snmp views Displays the configuration of SNMP views. Privileged EXEC
show snmp groups Displays the configuration of SNMP groups. Privileged EXEC
show snmp filters Displays the configuration of SNMP filters. Privileged EXEC
show snmp users Displays the configuration of SNMP users. Privileged EXEC