Quick Reference Guide

56 Command Groups
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
RADIUS Commands
RMON Commands
Command Group Description Access Mode
radius-server host Specifies a RADIUS server host. Global Configuration
radius-server key Sets the authentication and encryption key for all
RADIUS communications between the device and the
RADIUS daemon.
Global Configuration
radius-server retransmit Specifies the number of times the software searches
the list of RADIUS server hosts.
Global Configuration
radius-server source-ip Specifies the source IP address used for
communication with RADIUS servers.
Global Configuration
radius-server source-
ipv6
Specifies the source IPv6 address used for the IPv6
communication with RADIUS servers.
Global Configuration
radius-server timeout Sets the interval for which a device waits for a server
host to reply.
Global Configuration
radius-server deadtime Improves RADIUS response times when servers are
unavailable.
Global Configuration
show radius-servers Displays the RADIUS server settings. Privileged EXEC
Command Group Description Mode
show rmon statistics Displays RMON Ethernet Statistics. User EXEC
rmon collection history Enables a Remote Monitoring (RMON) MIB history
statistics group on an interface.
Interface
Configuration
show rmon collection
history
Displays the requested history group configuration. User EXEC
show rmon history Displays RMON Ethernet statistics history. User EXEC
rmon alarm Configures alarm conditions. Global Configuration
show rmon alarm-table Displays the alarms table. User EXEC
show rmon alarm Displays alarm configurations. User EXEC
rmon event Configures a RMON event. Global Configuration
show rmon events Displays the RMON event table. User EXEC
show rmon log Displays the RMON logging table. User EXEC
rmon table-size Configures the maximum RMON tables sizes. Global Configuration