Quick Reference Guide

550 802.1x Commands
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
User Guidelines
•The dot1x radius-attributes vlan command configuration is allowed only when the port is
Forced Authorized.
• RADIUS attributes are supported only in the multiple sessions mode (multiple hosts with
authentication).
• When RADIUS attributes are enabled and the RADIUS Accept message does not contain as an
attribute the supplicant’s VLAN, then the supplicant is rejected.
• Packets to the supplicant are sent untagged.
• After successful authentication the port remains member in the unauthenticated VLANs and in
the Guest VLAN. Other static VLAN configuration is not applied on the port.
• If the supplicant VLAN does not exist on the switch, the supplicant is rejected.
Examples
The following command enables user-based VLAN assignment.
show dot1x advanced
The show dot1x advanced Privileged EXEC mode command displays 802.1X advanced features
for the device or specified interface.
Syntax
• show dot1x advanced [ ethernet interface ]
•
interface — Valid Ethernet port. (Full syntax: unit/port )
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
console config-if(Config)# dot1x radius-attributes vlan