Quick Reference Guide

Command Groups 51
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
LLDP Commands
Command Group Description Access Mode
lldp enable (global) Enables Link Layer Discovery Protocol (LLDP). Global
configuration
lldp enable (interface) Enables LLDP on an interface. Interface
configuration
(Ethernet)
lldp timer Specifies how often the software sends LLDP updates. Global
configuration
lldp hold-multiplier Specifies the amount of time the receiving device should
hold a LLDP packet before discarding it.
Global
configuration
lldp reinit-delay Specifies the minimum time an LLDP port will wait before
reinitializing LLDP transmission.
Global
configuration
lldp tx-delay Specifies the delay between successive LLDP frame
transmissions initiated by value/status changes in the
LLDP local systems MIB.
Global
configuration
lldp optional-tlv Specifies which optional TLVs from the basic set should be
transmitted.
Interface
configuration
(Ethernet)
lldp management-
address
Specifies the management address that would be advertised
from an interface.
Interface
configuration
(Ethernet)
lldp med enable Enables LLDP Media Endpoint Discovery (MED) on an
interface.
Interface
configuration
(Ethernet)
lldp med network-
policy (global)
Defines LLDP MED network policy. Global
configuration
lldp med network-
policy (interface)
Attaches a LLDP MED network policy to a port. Interface
configuration
(Ethernet)
lldp med location Interface
configuration
(Ethernet)
clear lldp rx Restarts the LLDP RX state machine and clears the
neighbors table.
Privileged
EXEC
show lldp configuration Displays the LLDP configuration. Privileged
EXEC