Quick Reference Guide

48 Command Groups
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
IPv6 Addressing Commands
Command Group Description Access Mode
ipv6 enable Enables IPv6 processing on an interface. Interface Configu-
ration
ipv6 address autoconfig Enables automatic configuration of IPv6 addresses
using stateless autoconfiguration on an interface.
Interface Configu-
ration
ipv6 icmp error-interval Configures the rate limit interval and bucket size
parameters for IPv6 ICMP error messages.
Global Configura-
tion
show ipv6 icmp error-
interval
Displays the IPv6 ICMP error interval setting Privileged EXEC
ipv6 address Configures an IPv6 address for an interface. Interface Configu-
ration
ipv6 address link-local Configures an IPv6 link-local address for an interface. Interface Configu-
ration
ipv6 unreachables Enables the generation of Internet Control Message
Protocol for IPv6 (ICMPv6) unreachable messages for
any packets arriving on a specified interface.
Interface Configu-
ration
ipv6 default-gateway Defines an IPv6 default gateway. Global Configura-
tion
ipv6 mld join-group Configures Multicast Listener Discovery (MLD)
reporting for a specified group.
Interface Configu-
ration
ipv6 mld version Changes the Multicast Listener Discovery Protocol
(MLD) version.
Interface Configu-
ration
show ipv6 interface Displays the usability status of interfaces configured
for IPv6.
Privileged EXEC
show IPv6 route Displays the current state of the IPv6 routing table. Privileged EXEC
ipv6 nd dad attempts Configures the number of consecutive neighbor solici-
tation messages that are sent on an interface while
duplicate address detection is performed on the uni-
cast IPv6 addresses of the interface.
Interface Configu-
ration
ipv6 host Defines a static host name-to-address mapping in the
host name cache.
Global Configura-
tion
ipv6 neighbor Configures a static entry in the IPv6 neighbor discov-
ery cache.
Global Configura-
tion
ipv6 set mtu Sets the MTU size of IPv6 packets sent on an inter-
face.
Privileged EXEC
show ipv6 neighbors Displays IPv6 neighbor discovery cache information. Privileged EXEC