Quick Reference Guide

TIC Commands 461
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
• passwords aging enable-password level days
• no passwords aging enable-password level
• name — The name of the user. (Range: 1 - 20 characteres)
•
level — The level for which the password applies. (Range: 1 - 15)
•
days — The number of days before a password change is forced. (Range: 1 - 365)
Default Configuration
Password aging is disabled.
Command Mode
Global Configuration mode.
User Guidelines
• The aging time is calculated from the day the password was defined, and not from the day the
aging was defined.
• After a password expires a user can login for another 3 times.
• 10 days before expiration a syslog message is generated.
Example
The following example configures configures 40 days as the aging time of global passwords.
passwords history
The passwords history Global Configuration mode command sets the number of required
password changes before a password in the local database can be reused. Use the no form of this
command to remove this requirement,.
Syntax
• passwords history number
• no passwords history
• number — Indicates the required number of password changes before a password can be
reused. (Range: 1 - 10)
Default Configuration
No required number of password changes before reusing a password.
Console (config)# passwords aging username 40