Quick Reference Guide

432 System Management
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
• Destination (host/network) unreachable — The gateway for this destination indicates an
unreachable destination.
•
Destination does not respond — If the host does not respond, a “no answer from host”
appears in ten seconds.
The IPv6Z address format: <
ipv6-link-local-address >%< interface-name >
–
interface-name — vlan < integer > | ch < integer > | isatap < integer > | < physical-port-name > |
0
–
integer — < decimal-number > | < integer >< decimal-number >
–
decimal-number — 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
–
physical-port-name — Designated port number, for example 1/e16 .
When using the ping ipv6 command to check network connectivity of a directly attached host
using its link local address, the egress interface may be specified in the IPv6Z format. If the
egress interface is not specified, the default interface is selected. Specifying interface zone=0 is
the same as not defining an egress interface.
When using the ping ipv6 command with a multicast address, the information displayed is taken
from all received echo responses.
Examples
The following example displays pinging results:
Console> ping 10.1.1.1
Pinging 10.1.1.1 with 64 bytes of data:
64 bytes from 10.1.1.1: icmp_seq=0. time=11 ms
64 bytes from 10.1.1.1: icmp_seq=1. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=2. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=3. time=7 ms
----10.1.1.1 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 7/8/11