Quick Reference Guide

362 SNMP Commands
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
• Do not include spaces in the text string or place text that includes spaces inside quotation marks.
Example
The following example configures the system contact point called Dell_Technical_Support.
snmp-server location
The snmp-server location Global Configuration mode command configures the system location
string. To remove the location string.
Syntax
• snmp-server location text
• no snmp-server location
• text — Specifies a string that describes system location information.
(Range: 0 - 160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
Do not include spaces in the text string or place text that includes spaces inside quotation marks.
Example
The following example defines the device location as New_York.
snmp-server set
The snmp-server set Global Configuration mode command defines the SNMP MIB value.
console(config)# snmp-server contact Dell_Technical_Support
Console(config)# snmp-server location New_York