Quick Reference Guide

360 SNMP Commands
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
• traps — Indicates that SNMP traps are sent to this host.
•
informs — Indicates that SNMP informs are sent to this host.
•
noauth — Indicates no authentication of a packet.
•
auth — Indicates authentication of a packet without encrypting it.
•
priv — Indicates authentication of a packet with encryption.
•
port — Specifies the UDP port of the host to use. If unspecified, the default UDP port
number is 162. (Range: 1 - 65535)
•
filtername — Specifies a string that defines the filter for this host. If unspecified, nothing is
filtered. (Range: 1 - 30 characters)
•
seconds — Specifies the number of seconds to wait for an acknowledgment before
resending informs. If unspecified, the default timeout period is 15 seconds.
(Range: 1 - 300)
•
retries — Specifies the maximum number of times to resend an inform request, when a
response is not received for a generated message. If unspecified, the default maximum
number of retries is 3. (Range: 0 - 255)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
• A user and notification view are not automatically created. Use the snmp-server user , snmp-
server group
and snmp-server view Global Configuration mode commands to generate a user,
group and notify group, respectively.
• The IPv6Z address format: <
ipv6-link-local-address >%< interface-name >
–
interface-name — vlan < integer > | ch < integer > | isatap < integer > | < physical-port-name > |
0
–
integer — < decimal-number > | < integer >< decimal-number >
–
decimal-number — 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
–
physical-port-name — Designated port number, for example 1/e16.
If the egress interface is not specified, the default interface is selected. Specifying interface
zone=0 is the same as not defining an egress interface.