Quick Reference Guide

36 Command Groups
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Command Groups
The system commands can be broken down into functional groups as shown below.
Command Group Description
AAA Commands Configures connection security including authorization and
passwords.
ACL Commands Configures ACL on the device.
Address Table Commands Configures bridging Address Tables.
Clock Commands Configures clock commands on the device.
Configuration and Image Files
Commands
Manages the device configuration files.
DHCP Snooping Commands Configuring DHCP snooping on the device.
Ethernet Configuration Configures all port configuration options for, example ports, storm
control, and auto-negotiation.
GVRP Commands Configures and displays GVRP configuration and information.
IGMP Snooping Commands Configures IGMP snooping and displays IGMP configuration and
IGMP information.
IP Addressing Commands Configures and manages IP addresses on the device.
IPv6 Addressing Commands Configures and manages IPv6 addresses on the device.
LACP Commands Configures and displays LACP information.
Line Commands Configures the console and remote Telnet connection.
LLDP Commands Configures and displays LLDP information.
Login Banner Commands Configures customizable login banners on the device.
Management ACL Commands Configures and displays management access-list information.
PHY Diagnostics Commands Diagnoses and displays the interface status.
Power-over-Ethernet Commands Configure Power over Ethernet settings on the device.
Port Channel Commands Configures and displays Port Channel information.
Port Monitor Commands Monitors activity on specific target ports.
QoS Commands Configures and displays QoS information.
RADIUS Commands Configures and displays RADIUS information.
RMON Commands Displays RMON statistics.
SNMP Commands Configures SNMP communities, traps and displays SNMP
information.
Spanning Tree Commands Configures and reports on Spanning Tree protocol.