Quick Reference Guide
350 SNMP Commands
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
User Guidelines
•The
view-name
parameter cannot be specified for
su
, which has access to the whole MIB.
•The
view-name
parameter can be used to restrict the access rights of a community string. When
it is specified:
– An internal security name is generated.
– The internal security name for SNMPv1 and SNMPv2 security models is mapped to an
internal group name.
– The internal group name for SNMPv1 and SNMPv2 security models is mapped to a view-
name (read-view and notify-view always, and for
rw
for write-view also)
•The
group-name
parameter can also be used to restrict the access rights of a community string.
When it is specified:
– An internal security name is generated.
– The internal security name for SNMPv1 and SNMPv2 security models is mapped to the
group name.
•The
no snmp-server community
command is used to remove a community or a community
group.
Examples
The following example defines community access string public to permit administrative access to
SNMP protocol at an administrative station with IP address 192.168.1.20.
snmp-server view
The snmp-server view Global Configuration mode command creates or updates a Simple Network
Management Protocol (SNMP) server view entry. Use the no form of this command to remove a
specified SNMP server view entry.
Syntax
•
snmp-server view
view-name oid-tree
{included | excluded}
•
no snmp-server view
view-name
[
oid-tree
]
•
view-name
— Specifies the label for the view record that is being created or updated. The
name is used to reference the record. (Range: 1 - 30 characters)
•
oid-tree
— Specifies the object identifier of the ASN.1 subtree to be included or excluded
from the view. To identify the subtree, specify a text string consisting of numbers, such as
1.3.6.2.4, or a word, such as system. Replace a single subidentifier with the asterisk (*)
wildcard to specify a subtree family; for example 1.3.*.4. You may also identify the subtree
by specifying its logical name; for example, "IfEntry.*.1".
Console(config)# snmp-server community public su 192.168.1.20