Quick Reference Guide

336 RMON Commands
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Example
The following example enables a Remote Monitoring (RMON) MIB history statistics group on
Ethernet port 1/e1 with index number 1 and a polling interval period of 2400 seconds.
show rmon collection history
The show rmon collection history User EXEC mode command displays the requested RMON
history group statistics.
Syntax
• show rmon collection history [ ethernet interface | port-channel port-channel-number ]
•
interface — Valid Ethernet port. (Full syntax: unit/port )
•
port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays all RMON history group statistics.
Console(config)# interface ethernet 1/e1
Console(config-if)# rmon collection history 1 interval 2400
Console> show rmon collection history
Index Interface Interval Requested
Samples
Granted
Samples
Owner
------ ---------- -------- --------- ---------- ----
1 1/e1 30 50 50 CLI
2 1/e1 1800 50 50 Manager