Quick Reference Guide

RMON Commands 335
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
rmon collection history
The rmon collection history Interface Configuration (Ethernet, port-channel) mode command
enables a Remote Monitoring (RMON) MIB history statistics group on an interface. Use the no
form of this command to remove a specified RMON history statistics group.
Syntax
• rmon collection history index [ owner ownername ] [ buckets bucket-number ] [ interval
seconds ]
•
no rmon collection history index
• index — Specifies the statistics group index. (Range: 1 - 65535)
•
ownername — Specifies the RMON statistics group owner name.
•
bucket-number — Number of buckets specified for the RMON collection history group of
statistics. If unspecified, defaults to 50. (Range: 1 - 50)
•
seconds — Number of seconds in each polling cycle. (Range: 1 - 3600)
Default Configuration
RMON statistics group owner name is an empty string.
Number of buckets specified for the RMON collection history statistics group is 50.
Number of seconds in each polling cycle is 1800.
Command Mode
Interface Configuration (Ethernet, port-channel) mode.
User Guidelines
• Cannot be configured for a range of interfaces (range context).
512 to 1023 Octets The total number of packets (including bad packets) received that are between
512 and 1023 octets in length inclusive (excluding framing bits but including FCS
octets).
1024 to 1632 Octets The total number of packets (including bad packets) received that are between
1024 and 1632 octets in length inclusive (excluding framing bits but including
FCS octets).