Quick Reference Guide

RADIUS Commands 327
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
User Guidelines
There are no user guidelines for this command.
Example
The following example defines the authentication and encryption key for all RADIUS
communications between the device and the RADIUS daemon.
radius-server retransmit
The radius-server retransmit Global Configuration mode command specifies the number of times
the software searches the list of RADIUS server hosts. Use the no form of this command to reset
the default configuration.
Syntax
• radius-server retransmit retries
• no radius-server retransmit
• retries — Specifies the retransmit value. (Range: 1 - 10)
Default Configuration
The software searches the list of RADIUS server hosts 3 times.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the number of times the software searches the list of RADIUS
server hosts to 5 times.
radius-server source-ip
The radius-server source-ip Global Configuration mode command specifies the source IP address
used for communication with RADIUS servers. Use the no form of this command to return to the
default configuration.
Console(config)# radius-server key dell-server
console(config)# radius-server retransmit 5