Quick Reference Guide

QoS Commands 317
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example maps CoS 7 to queue 2.
show qos interface
The show qos interface User EXEC mode command displays interface QoS information.
Syntax
• show qos interface [ queuing | shapers | rate-limit ] [ ethernet interface-number | port-channel
number ]
•
queuing — Displays the queue's strategy (WRR or EF) and the weight for WRR queues and
the CoS to queue map and the EF priority.
•
shapers — Displays the shaper of the specified interface and the shaper for the queue on the
specified interface.
•
rate-limit — Displays the rate-limit configuration.
•
ethernet interface-number — Valid Ethernet port number.
•
port-channel number — Valid port-channel number.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC mode.
User Guidelines
• If no keyword is specified, port QoS information (e.g., DSCP trusted, CoS trusted, untrusted,
etc.) is displayed.
• If no interface is specified, QoS information about all interfaces is displayed.
Console(config)# wrr-queue cos-map 2 7