Quick Reference Guide

Power over Ethernet Commands 303
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
The following table describes the significant fields shown in the example:
6/e5 Auto Off low class0
6/e6 Auto Off low class0
6/e7 Auto Off low class0
6/e8 Auto Off low class0
6/e9 Auto Off low class0
6/e10 Auto Off low class0
6/e11 Auto Off low class0
6/e12 Auto Off low class0
6/e13 Auto Off low class0
6/e14 Auto Off low class0
6/e15 Auto Off low class0
6/e16 Auto Off low class0
6/e17 Auto Off low class0
6/e18 Auto Off low class0
Field Description
Power The operational status of the inline power sourcing equipment.
Nominal Power The nominal power of the inline power sourcing equipment in Watts.
Consumed Power Measured usage power in Watts.
Usage Threshold The usage threshold expressed in percents for comparing the measured
power and initiating an alarm if threshold is exceeded.
Traps Indicates if inline power traps are enabled.
Port The Ethernet port number.
Powered Device Description of the powered device type.
State Indicates if the port is enabled to provide power. Can be: Auto or Never.
Priority The priority of the port from the point of view of inline power management.
Can be: Critical, High or Low.