Quick Reference Guide

270 LLDP Commands
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Syntax
• lldp reinit-delay seconds
• no lldp reinit-delay
• seconds — Specifies the minimum time in seconds an LLDP port waits before reinitializing
LLDP transmission. (Range 1-10 seconds)
Default Configuration
2 seconds
Command Modes
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Examples
The following example specifies the minimum time an LLDP port will wait before reinitializing LLDP
transmission.
lldp tx-delay
The lldp tx-delay Global Configuration mode command specifies the delay between successive
LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB. Use
the no form of this command to revert to the default setting.
Syntax
• lldp tx-delay seconds
•
no lldp tx-delay
Parameters
• seconds — Specifies the delay in seconds between successive LLDP frame transmissions
initiated by value/status changes in the LLDP local systems MIB. Range 1-8192 second.
Default Configuration
The default value is 2 seconds
Command Modes
Global Configuration mode.
Console (config) # lldp reinit-delay 6