Quick Reference Guide

264 Management ACL
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
• mask prefix-length — Specifies the number of bits that comprise the source IP address
prefix. The prefix length must be preceded by a forward slash (/). (Range: 0-32)
•
service service — Service type. Possible values: telnet , ssh , http, https and snmp .
Default Configuration
This command has no default configuration.
Command Mode
Management Access-list Configuration mode.
User Guidelines
• Rules with Ethernet, VLAN and port-channel parameters are valid only if an IP address is
defined on the appropriate interface.
• The system supports up to 128 management access rules.
Example
The following example denies all ports in the access list called mlist.
management access-class
The management access-class Global Configuration mode command restricts management
connections by defining the active management access list. Use the no form of this command to
disable this restriction.
Syntax
• management access-class { console-only | name }
•
no management access-class
• name — Specifies the name of the access list to be used. (Range: 1-32 characters)
•
console-only — Indicates that the device can be managed only from the console.
Default Configuration
If no access list is specified, an empty access list is used.
Command Mode
Global Configuration mode.
Console(config)# management access-list mlist
Console(config-macl)# deny