Quick Reference Guide

Template Last Updated - 7/01/2005 IPv6 Addressing 231
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Ryan - old template\IPv6Addressing.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Command Mode
Global Configuration mode.
User Guidelines
• To set the average icmp error rate limit, calculate the interval by the following formula:
Average Packets Per Second = (1/ interval) * bucket size
Example
The following example configures the rate limit interval to 200ms and bucket size to 20 tokens for IPv6
Internet Control Message Protocol (ICMP) error messages.
show ipv6 icmp error-interval
The show ipv6 error-interval command Privileged EXEC mode command displays the IPv6 ICMP error
interval setting.
Syntax
• show ipv6 icmp error-interval
Default Configuration
This command has no default setting.
Command Mode
Privileged EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example displays the IPv6 ICMP error interval setting..
ipv6 address
The ipv6 address Interface Configuration mode command configures an IPv6 address for an interface. use
the no form of this command to remove the address from the interface.
Console (config)# ipv6 icmp error-interval 200 10
Console> show ipv6 icmp error-interval
Rate limit interval: 100 ms
Bucket size: 10 tokens