Quick Reference Guide

IP Addressing Commands 223
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays entries in the ARP table.
ip domain-lookup
The ip domain-lookup Global Configuration mode command enables the IP Domain Naming
System (DNS)-based host name-to-address translation. Use the no form of this command to disable
DNS-based host name-to-address translation.
Syntax
• ip domain-lookup
• no ip domain-lookup
Default Configuration
IP Domain Naming System (DNS)-based host name-to-address translation is enabled.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Console# show arp
ARP timeout: 80000 Seconds
Interface IP address HW address Status
--------- ---------- ----------------- -------
1/e1 10.7.1.102 00:10:B5:04:DB:4B Dynamic
2/e2 10.7.1.135 00:50:22:00:2A:A4 Static