Quick Reference Guide

IGMP Snooping Commands 213
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Example
The following example enables IGMP querier on a specific VLAN.
show ip igmp snooping mrouter
The show ip igmp snooping mrouter User EXEC mode command displays information on
dynamically learned Multicast router interfaces.
Syntax
• show ip igmp snooping mrouter [ interface vlan-id ]
•
vlan-id — VLAN number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
console(config)# interface vlan 2
VLAN 2 does not exist.
All settings will be applied to VLAN 2 when it is created.
console(config-if-ghost-vlan)# ip igmp snooping querier enable
console(config-if-ghost-vlan)# ip igmp snooping querier address
% missing mandatory parameter
console(config-if-ghost-vlan)# ip igmp snooping querier address
1.1.1.1
console(config-if-ghost-vlan)#