Quick Reference Guide

212 IGMP Snooping Commands
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Example
The following example enables IGMP querier on VLAN 2.
ip igmp snooping querier address
The ip igmp snooping querier address Interface Configuration mode command defines the source
IP address used by the IGMP Snooping querier. Use the no form of this command to return to
default.
Syntax
• ip igmp snooping querier address ip-address
• no ip igmp snooping querier address
Default Configuration
If an IP address is configured for the VLAN, it is used as the source address of the IGMP
snooping querier.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
• If an IP address is not configured by this command, and no IP address is configured for the
IGMP querier VLAN interface, the qurier is disabled.
console# config
console(config)# interface vlan 2
VLAN 2 does not exist.
All settings will be applied to VLAN 2 when it is created.
console(config-if-ghost-vlan)# ip igmp snooping querier enable
console(config-if-ghost-vlan)#