Quick Reference Guide

146 Clock
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Default Configuration
The SNTP client is disabled on an interface.
Command Mode
Interface configuration (Ethernet, port-channel, VLAN) mode.
User Guidelines
•Use the sntp broadcast client enable Global Configuration mode command to enable Broadcast
clients globally.
•Use the
sntp anycast client enable Global Configuration mode command to enable Anycast
clients globally.
Examples
The following example enables the SNTP client on Ethernet port 1/e3.
sntp unicast client enable
The sntp unicast client enable Global Configuration mode command enables the device to use the
Simple Network Time Protocol (SNTP) to request and accept SNTP traffic from servers. Use the
no form of this command to disable requesting and accepting SNTP traffic from servers.
Syntax
• sntp unicast client enable
• no sntp unicast client enable
Default Configuration
The SNTP Unicast client is disabled.
Command Mode
Global Configuration mode.
Console(config)# interface ethernet 1/e3
Console(config-if)# sntp client enable