Quick Reference Guide

Address Table Commands 125
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
User Guidelines
• Internal usage VLANs (VLANs that are automatically allocated on ports with a defined Layer 3
interface) are presented in the VLAN column by a port number and not by a VLAN ID.
• "Special" MAC addresses that were not statically defined or dynamically learned are displayed
in the MAC Address Table. This includes, for example, MAC addresses defined in ACLs.
Example
The following example displays all classes of entries in the bridge-forwarding database.
show bridge address-table static
The show bridge address-table static Privileged EXEC mode command displays statically created
entries in the bridge-forwarding database.
Syntax
• show bridge address-table static [ vlan vlan ] [ ethernet interface | port-channel port-channel-
number
]
Parameters
• vlan — Specifies a valid VLAN, such as VLAN 1.
•
interface — A valid Ethernet port number .
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
Console# show bridge address-table
Aging time is 300 sec
Vlan mac address Port Type
--------- -------------- ---- -------
1 00:60:70:4C:73:FF 5/e8 dynamic
1 00:60:70:8C:73:FF 5/e8 dynamic
200 00:10:0D:48:37:FF 5/e9 static