Quick Reference Guide

74 Command Modes

www.dell.com | support.dell.com

DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY

passwords history

Sets the number of required password changes before a password in the

local database can be reused.

passwords history hold-time Sets the number of days a password is relevant for tracking its password

history.

passwords lockout

Sets the number of failed login attempts before a user account is locked.

power inline traps enable

Adds a description of the powered device type attached to the interface.

power inline usage-threshold Configures the administrative mode of the inline power on an interface.

priority-queue out num-of-

queues

Enables the egress queues to be SP queues.

qos Enables Quality of Service (QoS) on the device and enters QoS basic or

advance mode.

qos map dscp-queue Modifies the DSCP to CoS map.

qos trust (Global) Configure the system to "trust" state.

radius-server deadtime Improves RADIUS response times when servers are unavailable.

radius-server host Specifies a RADIUS server host.

radius-server key Sets the authentication and encryption key for all RADIUS

communications between the device and the RADIUS daemon.

radius-server retransmit Specifies the number of times the software searches the list of RADIUS

server hosts.

radius-server source-ip Specifies the source IP address used for communication with RADIUS

servers.

radius-server source-ipv6 Specifies the source IPv6 address used for the IPv6 communication

with RADIUS servers.

radius-server timeout Sets the interval for which a device waits for a server host to reply.

rmon alarm Configures alarm conditions.

rmon event Configures a RMON event.

rmon table-size Configures the maximum RMON tables sizes.

show cpu utilization Enables measuring CPU utilization.

show users Changes the unit ID of a specific unit.

snmp-server community Sets up the community access string to permit access to SNMP

protocol.

snmp-server contact Sets up a system contact.

snmp-server enable traps Enables the device to send SNMP traps or SNMP notifications.

snmp-server engineID local Specifies an SNMP EngineID on the local device.