Quick Reference Guide

802.1x Commands 549
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
dot1x traps mac-authentication failure
The dot1x traps mac-authentication failure Global Configuration mode command enables
sending traps when a MAC address was failed in authentication of the 802.1X MAC authentication
access control. Use the no form of this command to disable the traps.
Syntax
• dot1x traps mac-authentication failure
• no dot1x traps mac-authentication failure
Default Configuration
This command has no default configuration.
Command Mode
Global configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following command enables sending traps when a MAC address was failed in authentication of
the 802.1X MAC authentication access control.
dot1x radius-attributes vlan
The dot1x radius-attributes vlan Interface Configuration mode command enables user-based
VLAN assignment. Use the no form of this command to disable user-based VLAN assignment.
Syntax
• dot1x radius-attributes vlan
• no dot1x radius-attributes vlan
Default Configuration
Disabled.
Command Mode
Interface configuration (Ethernet) mode
console config-if(Config)# dot1x traps mac-authentication failure