Quick Reference Guide

546 802.1x Commands
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
• discard-shutdown — Discards frames with source addresses that are not the supplicant
address. The port is also shut down.
•
trap — Indicates that SNMP traps are sent.
•
seconds — Specifies the minimum amount of time in seconds between consecutive traps.
(Range: 1 -
1000000 )
Default Configuration
Frames with source addresses that are not the supplicant address are discarded.
No traps are sent.
Command Mode
Interface Configuration (Ethernet) mode.
User Guidelines
• The command is relevant when multiple hosts is disabled and the user has been successfully
authenticated.
Examples
The following example forwards frames with source addresses that are not the supplicant address
and sends consecutive traps at intervals of 100 seconds.
dot1x guest-vlan
The dot1x guest-vlan Interface Configuration mode command defines a guest VLAN. Use the no
form of this command to return to the default configuration.
Syntax
• dot1x guest-vlan
• no dot1x guest-vlan
Default Configuration
No VLAN is defined as a guest VLAN.
Command Mode
Interface Configuration (VLAN) mode.
Console(config-if)# dot1x single-host-violation forward trap 100