Quick Reference Guide

474 Tunnel
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Ryan - old template\Tunnel.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
tunnel isatap query-interval
The tunnel isatap query-interval Global Configuration mode command configures the interval between
DNS Queries (before the IP address of the ISATAP router is known) for the automatic tunnel router domain
name. Use the no form of this command to return to default.
Syntax
• tunnel isatap query-interval seconds
• no tunnel isatap query-interval
• seconds — Specify the number of seconds between DNS Queries. (Range: 10 – 3600)
Default Configuration
10 seconds.
Command Mode
Global Configuration mode.
User Guidelines
• This command determines the interval of DNS queries before the IP address of the ISATAP router is
known. When the IP address is known the robustness level that is set by the
tunnel isatap robustness
global configuration command determines the refresh rate.
Example
The following example configures the interval between DNS Queries for the automatic tunnel router domain
to 60 seconds.
tunnel isatap solicitation-interval
The tunnel isatap solicitation-interval Global Configuration mode command configures the interval
between ISATAP router solicitations messages (when there is no active ISATAP router). Use the no form of
this command to return to default.
Syntax
• tunnel isatap solicitation-interval seconds
• no tunnel isatap solicitation-interval
• seconds — Specify the number of seconds between ISATAP router solicitations messages. (Range: 10
– 3600)
Console (config)# tunnel isatap query-interval 60