Quick Reference Guide

SNMP Commands 361
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Example
The following example configures an SNMPv3 host.
snmp-server trap authentication
The snmp-server trap authentication Global Configuration mode command enables the device to
send SNMP traps when authentication fails. Use the no form of this command to disable SNMP
failed authentication traps.
Syntax
• snmp-server trap authentication
• no snmp-server trap authentication
Default Configuration
SNMP failed authentication traps are enabled.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables SNMP failed authentication traps.
snmp-server contact
The snmp-server contact Global Configuration mode command configures the system contact
(sysContact) string. To remove system contact information, use the no form of the command.
Syntax
• snmp-server contact text
• no snmp-server contact
• text — Specifies the string that describes system contact information.
(Range: 0 - 160 characters)
console(config)# snmp-server v3-host 192.168.0.20 john noauth
Console(config)# snmp-server trap authentication