Quick Reference Guide

SNMP Commands 351
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
• included — Indicates that the view type is included.
•
excluded — Indicates that the view type is excluded.
Default Configuration
No view entry exists.
Command Mode
Global Configuration mode.
User Guidelines
• This command can be entered multiple times for the same view record.
• The number of views is limited to 64 including pre-configured views.
• No check is made to determine that a MIB node corresponds to the "starting portion" of the OID
until the first wildcard.
• Following is a list of unsupported counters in the Iftable MIB:
– ifInDiscards
– ifOutErrors
–ifOutQLen
–ifHCInOctets
–ifHCInUcastPkts
– ifHCInMulticastPkts
–ifHCInBroadcastPkts
– ifHCOutOctets
–ifHCOutUcastPkts
– ifHCOutMulticastPkts
– ifHCOutBroadcastPkts
• The following counters are also not supported
– Alignment errors
– Multiple Collision Frames
– SQE Test Errors
– Ryan Sense Errors
– Symbol Errors