Quick Reference Guide

328 RADIUS Commands
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Syntax
• radius-server source-ip source
• no radius-source-ip source
• source — Specifies a valid source IP address.
Default Configuration
The source IP address is the IP address of the outgoing IP interface.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the source IP address used for communication with RADIUS
servers to 10.1.1.1.
radius-server source-ipv6
The radius-server source-ipv6 Global Configuration mode command specifies the source IPv6
address used for the IPv6 communication with RADIUS servers. Use the no form of this command
to return to the default.
Syntax
• radius-server source-ipv6 source
• no radius-server source-ipv6 source
• source — Specifies the source IPv6 address.
Default Configuration
The default IP address is the outgoing IP interface.
Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
console(config)# radius-server source-ip 10.1.1.1