Quick Reference Guide

276 LLDP Commands
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Syntax
• clear lldp rx [ethernet interface]
•
Interface — Ethernet port
Command Modes
Privileged EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example restarts the LLDP RX state machine and clearing the neighbors table.
show lldp configuration
To display the Link Layer Discovery Protocol (LLDP) configuration, use the show lldp configuration
command in privileged EXEC mode.
Syntax
• show lldp configuration [ethernet interface]
•
Interface — Ethernet port
Command Modes
Privileged EXEC mode.
User Guidelines
• There are no user guidelines for this command.
console(config)# exit
console# clear lldp rx
console#