Quick Reference Guide

274 LLDP Commands
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Example
The following example defines the LLDP MED network policy. To remove LLDP MED network
policy.
lldp med network-policy (interface)
The lldp med network-policy Interface Configuration (Ethernet) mode command attaches a LLDP
MED network policy to a port. Use the
no form of this command to remove an LLDP MED network
policy from a port.
Syntax
• lldp med network-policy { add / remove } number
•
no lldp med network-policy number
• number — Network policy sequential number.
•add — Specifies attach to a port.
•
remove — Specifies remove from a porty.
Default Configuration
No network policy is attached.
Command Mode
Interface Configuration (Ethernet) mode.
User Guidelines
There are no guidelines for this command.
Example
The following example attaches a LLDP MED network policy to a port.
lldp med location
The lldp med location Interface Configuration mode command configures location information for
the Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) for an interface.
Use the no form of this command to delete location information for an interface.
Console(config)# lldp tx-delay
Console(config)# interface ethernet 1/e1
Console(config-if)# lldp med enable