Quick Reference Guide

190 Ethernet Configuration Commands
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
show interfaces status
The show interfaces status Privileged EXEC mode command displays the status of all configured
interfaces.
Syntax
• show interfaces status [ethernet interface | port-channel port-channel-number ]
•
interface — A valid Ethernet port. (Full syntax: unit/port )
•
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
1/e8 100M-
Copper
Full 100 Enabled Off Up Disabled Auto
1/e9 100M-
Copper
Full 100 Enabled Off Up Disabled Auto
1/e10 100M-
Copper
Full 100 Enabled Off Up Disabled Auto
1/e11 100M-
Copper
Full 100 Enabled Off Up Disabled Auto
1/e12 100M-
Copper
Full 100 Enabled Off Up Disabled Auto
1/e13 100M-
Copper
Full 100 Enabled Off Up Disabled Auto
1/e14 100M-
Copper
Full 100 Enabled Off Up Disabled Auto
1/e15 100M-
Copper
Full 100 Enabled Off Up Disabled Auto
1/e16 100M-
Copper
Full 100 Enabled Off Up Disabled Auto
1/e17 100M-
Copper
Full 100 Enabled Off Up Disabled Auto
1/e18 100M-
Copper
Full 100 Enabled Off Up Disabled Auto
1/e19 100M-
Copper
Full 100 Enabled Off Up Disabled Auto