Quick Reference Guide

180 Ethernet Configuration Commands
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
• Commands under the interface range context are executed independently on each active interface
in the range. If the command returns an error on one of the active interfaces, it does not stop
executing commands on other active interfaces.
Example
The following example shows how ports 5/e18 to 5/e20 and 3/e1 to 3/24 are grouped to receive the
same command.
shutdown
The shutdown Interface Configuration (Ethernet, port-channel) mode command disables an
interface. Use the no form of this command to restart a disabled interface.
Syntax
• shutdown
• no shutdown
Default Configuration
The interface is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode.
User Guidelines
There are no user guidelines for this command.
Examples
The following example disables Ethernet port 1/e5 operations.
Console(config)# interface range ethernet 5/e18-5/e20,3/e1-3/e24
Console(config-if)#
Console(config)# interface ethernet 1/e5
Console(config-if)# shutdown