Quick Reference Guide

Clock 145
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
sntp client enable
The sntp client enable Global Configuration mode command enables the Simple Network Time
Protocol (SNTP) Broadcast and Anycast client on an interface.
Use the no form of this command to
disable the SNTP client.
Syntax
• sntp client enable { ethernet interface-number | vlan vlan-id | port-channel number }
•
no sntp client enable { ethernet interface-number | vlan vlan-id | port-channel number }
•
ethernet interface-number — Ethernet port number.
•
vlan vlan-id — VLAN number.
•
port-channel number — Port channel number.
Default Configuration
Disabled.
Command Mode
Global Configuration mode.
User Guidelines
•Use the sntp Broadcast client enable Global configuration command to enable Broadcast
clients globally.
•Use the
sntp Anycast client enable Global configuration command to enable Anycast clients
globally.
Examples
The following example enables the SNTP client on the interface.
sntp client enable (Interface)
The sntp client enable Interface Configuration (Ethernet, port-channel, VLAN) mode command
enables the Simple Network Time Protocol (SNTP) client on an interface. This applies to both
receive Broadcast and Anycast updates. Use the no form of this command to disable the SNTP
client.
Syntax
• sntp client enable
• no sntp client enable
Console (config)# sntp client enable