Quick Reference Guide

124 Address Table Commands
www.dell.com | support.dell.com
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 – FOR PROOF ONLY
Example
The following example adds the MAC-layer address 66:66:66:66:66:66 to port 1/e1.
show bridge address-table
The show bridge address-table Privileged EXEC mode command displays all entries in the
bridge-forwarding database.
Syntax
• show bridge address-table [ vlan vlan ] [ ethernet interface | port-channel port-channel-
number
]
•
vlan — Specifies a valid VLAN, such as VLAN 1.
•
interface — A valid Ethernet port .
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
Console(config)# interface ethernet 1/e1
Console(config-if)# port security routed secure-address
66:66:66:66:66:66