Reference Guide

76 AAA Commands
www.dell.com | support.dell.com
Syntax
login authentication { default | list-name }
no login authentication
• default — Uses the default list created with the aaa authentication login command.
•
list-name — Uses the indicated list created with the aaa authentication login command.
Default Configuration
Uses the default set with the command aaa authentication login .
Command Mode
Line Configuration mode
User Guidelines
• Changing login authentication from default to another value may disconnect the telnet
session.
Example
The following example specifies the default authentication method for a console.
enable authentication
The enable authentication Line Configuration mode command specifies the authentication
method list when accessing a higher privilege level from a remote telnet or console. To return to
the default configuration specified by the aaa authentication enable command, use the no form
of this command.
Syntax
enable authentication { default | list-name }
no enable authentication
• default — Uses the default list created with the aaa authentication enable command.
•
list-name — Uses the indicated list created with the aaa authentication enable
command.
Default Configuration
Uses the default set with the aaa authentication enable command.
Console(config)# line console
Console(config-line)# login authentication default