Reference Guide

58 Command Modes
www.dell.com | support.dell.com
delete Deletes a file from a Flash memory device.
delete startup-config Deletes the startup-config file.
dir Displays a list of files on a flash file system.
dot1x re-authenticate Manually initiates a re-authentication of all 802.1x-enabled ports or
the specified 802.1x-enabled port.
exit Closes an active terminal session by logging off the device.
login Changes a login username.
more Displays a file.
reload Reloads the operating system.
rename Renames a file.
set enable-password active Reactivates a locked local password.
set interface active Reactivates an interface that was suspended by the system.
set line active Reactivates a locked line.
set username active
Reactivates a locked user account.
show access-lists Displays ACLs defined on the device.
show arp Displays entries in the ARP table.
show authentication methods Displays information about the authentication methods.
show bootvar Displays the active system image file that the device loads at startup
show bridge address-table Displays all entries in the bridge-forwarding database.
show bridge address-table
count
Displays the number of addresses present in all VLANs or at specific
VLAN.
show bridge multicast
address-table
Displays multicast MAC or IP address table information.
show bridge multicast
filtering
Displays the multicast filtering configuration.
show crypto key mypubkey Displays the SSH public keys stored on the device.
show crypto key pubkey-chain
ssh
Displays SSH public keys stored on the device.
show crypto certificate
mycertificate
Displays the SSL certificates of the device
show crypto slogin key
mypubkey
Displays the secure login public key of the device.
show dot1x Displays 802.1x status for the device or for the specified interface.
show dot1x advanced Displays 802.1x enhanced features for the device or for the specified
interface.