Reference Guide

Command Modes 55
mdix Enables automatic crossover on a given interface.
name Configures a name to a VLAN.
negotiation Enables auto-negotiation operation for the speed and duplex
parameters of a given interface.
power inline Configures the administrative mode of the inline power on an
interface.
power inline powered-device
Adds a description of the powered device type attached to the interface.
power inline priority Displays port monitoring status
port monitor Starts a port monitoring session.
port security Disables new address learning/forwarding on an interface.
port monitor vlan-tagging Transmits tagged ingress mirrored packets.
port security max Configures the maximum number of addresses that may be learned
on the port while the port is in port security mode
port security mode Configures the port security learning mode
port security routed secure-
address
Adds MAC-layer secure addresses to a routed port.
port storm-control broadcast
enable
Enables broadcast storm control.
port storm-control broadcast
rate
Configures the maximum broadcast rate.
port storm-control include-
multicast
Enables the device to count multicast packets.
private-vlan community Associates the primary VLAN and community VLANs.
private-vlan isolated Defines the isolated VLAN of the PVLAN.
private-vlan primary Defines the primary PVLAN.
qos cos Configures the default port CoS value.
qos trust (Interface) Enables each port trust state while the system is in basic mode.
rmon collection history Enables a Remote Monitoring (RMON) MIB history statistics group
on an interface.
service-acl Applies an ACL to the input interface.
shutdown Disables interfaces.
sntp client enable (Interface) Enables the Simple Network Time Protocol (SNTP) client on an
interface.
spanning-tree cost Configures the spanning tree path cost for a port.
spanning-tree disable Disables spanning tree on a specific port.