Reference Guide

52 Command Modes
www.dell.com | support.dell.com
radius-server host Specifies a RADIUS server host.
radius-server key Sets the authentication and encryption key for all RADIUS
communications between the device and the RADIUS daemon.
radius-server retransmit Specifies the number of times the software searches the list of
RADIUS server hosts.
radius-server source-ip Specifies the source IP address used for communication with
RADIUS servers.
radius-server timeout Sets the interval for which a device waits for a server host to reply.
rmon alarm Configures alarm conditions.
rmon event Configures a RMON event.
rmon table-size Configures the maximum RMON tables sizes.
service cpu-utilization Enables measuring CPU utilization.
snmp-server community Sets up the community access string to permit access to SNMP
protocol.
snmp-server contact Sets up a system contact.
snmp-server enable traps Enables the device to send SNMP traps or SNMP notifications.
snmp-server engineID local Specifies an SNMP EngineID on the local device.
snmp-server filter Creates and modifies filter entries.
snmp-server group Configures a new SNMP group or a table that maps SNMP users to
SNMP views.
snmp-server host Specifies the recipient of Simple Network Management Protocol
notification operation.
snmp-server v3-host Specifies an SNMP v3 notification recipient.
snmp-server location Sets up the information on where the device is located.
snmp-server set Sets SNMP MIB value by the CLI.
snmp-server trap
authentication
Enables the device to send Simple Network Management Protocol
traps when authentication failed.
snmp-server user Configures a new SNMP v3 user.
snmp-server view Creates and modifies view entries.
sntp authenticate Grants authentication for received Simple Network Time Protocol
(SNTP) traffic from servers.
sntp authentication-key Defines an authentication key for Simple Network Time Protocol
(SNTP).
spanning-tree Enables spanning tree functionality.