Reference Guide

Command Modes 51
ip ssh server Enables the device to be configured from a SSH server.
lacp system-priority Configures the system LACP priority.
line Identifies a specific line for configuration and enters the line
configuration command mode.
logging Logs messages to a syslog server.
logging buffered Limits syslog messages displayed from an internal buffer based on
severity.
logging buffered size Changes the number of syslog messages stored in the internal buffer.
logging console Limits messages logged to the console based on severity.
logging file Limits syslog messages sent to the logging file based on severity.
logging on Controls error messages logging.
mac access-list Creates Layer 2 ACLs.
management access-class Defines which management access-list is used.
management access-list Defines a management access-list, and enters the access-list for
configuration.
management logging Enables logging management access list events.
passwords aging Sets the expiration time for passwords in the local database.
passwords history
Sets the number of required password changes before a password in the
local database can be reused.
passwords history hold-time Sets the number of days a password is relevant for tracking its
password history.
passwords lockout
Sets the number of failed login attempts before a user account is
locked.
passwords min-length Sets the minimum required length for passwords in the local
database.
power inline traps enable
Adds a description of the powered device type attached to the interface.
power inline usage-threshold Configures the administrative mode of the inline power on an
interface.
priority-queue out num-of-
queues
Enables the egress queues to be SP queues.
qos Enables Quality of Service (QoS) on the device and enters QoS basic
or advance mode.
qos map dscp-queue Modifies the DSCP to CoS map.
qos trust (Global) Configure the system to "trust" state.
radius-server deadtime Improves RADIUS response times when servers are unavailable.