Reference Guide

50 Command Modes
www.dell.com | support.dell.com
enable password Sets a local password to control access to normal and privilege levels.
end Ends the current configuration session and returns to the previous
command mode.
file-system logging Enables logging file system events.
gvrp enable (Global) Enables GVRP globally.
hostname Specifies or modifies the device host name.
interface ethernet Enters the interface configuration mode to configure an Ethernet
type interface.
interface port-channel Enters the interface configuration mode of a specific port-channel.
interface range ethernet Enters the interface configuration mode to configure multiple
ethernet type interfaces.
interface range port-channel Enters the interface configuration mode to configure multiple port-
channels.
interface range vlan Enters the interface configuration mode to configure multiple
VLANs.
interface vlan Enters the interface configuration (VLAN) mode.
ip default-gateway Defines a default gateway.
ip domain-lookup Enables the IP Domain Naming System (DNS)-based host name-to-
address translation.
ip domain-name Defines a default domain name, that the software uses to complete
unqualified host names.
ip host Defines static host name-to-address mapping in the host cache.
ip http authentication Specifies authentication methods for HTTP server users.
ip http port Specifies the TCP port for use by a web browser to configure the
device.
ip http server Enables the device to be configured from a browser.
ip https authentication Specifies authentication methods for HTTPS server users.
ip https certificate Configures the active certificate for HTTPS.
ip https server Enables the device to be configured from a secured browser.
ip https port Configures a TCP port for use by a secure web browser to configure
the device.
ip igmp snooping (Global) Enables Internet Group Management Protocol (IGMP) snooping
ip name-server Sets the available name servers.
ip ssh port Specifies the port to be used by the SSH server.
ip ssh pubkey-auth Enables public key authentication for incoming SSH sessions.