Reference Guide

44 Command Groups
www.dell.com | support.dell.com
TACACS Commands
User Interface Commands
Command Group Description Mode
tacacs-server host Specifies a TACACS+ host. Global
Configuration
tacacs-server key Sets the authentication encryption key used for all
TACACS+ communications between the device and
the TACACS+ daemon.
Global
Configuration
tacacs-server source-ip Specifies the source IP address that will be used for the
communication with TACACS+ servers.
Global
Configuration
tacacs-server timeout Sets the timeout value. Global
Configuration
show tacacs Displays configuration and statistics for a TACACS+
servers.
Privileged EXEC
Command Group Description Access Mode
enable Enters the privileged EXEC mode. User EXEC
disable Returns to User EXEC mode. Privileged EXEC
login Changes a login username. Priv/User EXEC
configure
Enables the global configuration mode. Privileged EXEC
exit (Configuration) Exits any configuration mode to the next highest
mode in the CLI mode hierarchy.
All
exit Closes an active terminal session by logging off the
device.
Priv/User EXEC
end Ends the current configuration session and returns to
the Privileged EXEC mode.
After Privileged
EXEC
help Displays a brief description of the help system. All
terminal datadump Enables dumping all output of a show command
without prompting.
User EXEC
show history Lists the commands entered in the current session. Privileged EXEC
show privilege Displays the current privilege level. User EXEC